Recycling of full-size waste printed circuit boards using an organic solvent

Technorama 2018

Authors: Tatariants Maksym, Yousef Samy

Guides: Denafas Gintaras, Bendikienė Regita

Description:

This work aims to separate all elements of Waste Printed Circuit Boards (WPCBs) (PC Video card) by using organic solvent di-methyl formamide (DMF) and ultrasonic treatment applied to raw material placed inside reaction chamber at lower temperatures (50°C). In the beginning, experiments were conducted on powder and small pieces (100 mm2) of WPCBs in order to determine the optimum conditions, then obtained data were used in the separation of video card by cleaving the macromolecular reticulate structure of brominated epoxy resin (BER). Thus, dissolution of BER was performed, copper foils and woven glass fiber layers were separated. Also, rotary decompression evaporator was used to regenerate used DMF and extract BER. Ultraviolet-visible spectroscopy, metallographic microscope, and EDS were used to examine the recovered BER and fiberglass structure and main metal composition of each sample. The results showed that the developed approach is more efficient for the countries having a hot climate because the developed technique doesn’t need a high heating rate since the used temperature was 50°C. Also, it was determined that video card PCB consists of 10 woven glass fiber layers (6 substrate layers and 4 isolating layers), copper, aluminum, lead, tin, and BER.

 

 

Trukmė:
2017 - 2017

We are using cookies to provide statistics that help us give you the best experience of our site. You can find out more or switch them off if you prefer. However, by continuing to use the site without changing settings, you are agreeing to our use of cookies.
Sutinku